20mtr x 80mtr Indoor or Outdoor Riding Arena Watering Kit (4 valves)

20 metre x 80 metre Indoor or Outdoor Riding Arena - watering in 4 section

Supply one Lowara multistage single phase 3hp pump unit compete discharge fittings to consist of; non-return valve, pressure relief valve with piped return to tank, manual isolator valve, pressure gauge and polyethylene pipe connection.

Supply polyethylene (PE) pipe to run from pump unit to corner/edge of arena terminating with manual isolator valve and four 1" solenoid valves or solenoid valves can be mounted at the pump position.

Supply PE pipe and fittings to run from each of the solenoid valves.  The PE pipe is to be running behind the kick boards or around the outside of the fencing.  Tee off the PE pipe with fourteen Hunter pop-up sprinklers, which are to be placed behind the kick boards or fencing, and will pop-up above the boards when operating and retract back down when watering is finished. 

The arena will water in four sections.

Supply one electrical panel complete with breaker board, isolator, low water cut off controls, and one 6 station automatic controller.
 

Each watering package contains;

• Pump and controls
• Pipework and fittings
• Solenoid valve Manifold
• Take offs including sprinklers
• Drain point take offs to drain down during cold spells

NOTE: Pictures may include optional extras

Tank Option - Vertical Non-Potable Water Storage Tanks

These water tanks are made from a Medium Density Polyethylene  (MDPE). Non Potable.

Tanks come with positive tie down points for easy handling and positioning.

• 1250 L – 30000 L Capacities
• UV stabilized to withstand the elements
• 450mm manhole access lid
• Positive tie down points
• Ribbed sides for extra strength
• Potable water tanks available 
  
• Standard colour - Black
• Outlet bulkhead fitting

Mains water fill float valve and pipe kit consists of;

• 25 metres of 25mm Blue mains water pipe
• 1 x compression stop cock
• 1 x 25mm x drain point x 25mm compression tee
• 4 x 25mm compression elbow
• 3 x 25mm x ¾" compression adaptor
• 1 x ¾" Double check valve
  
• 1 x ¾" Polypropylene socket
• 1 x ¾" Polypropylene M/F elbow 90
• 1 x ¾" Ball valve assembly
• 1 x ¾" Ball valve float
• 2 metres of 25mm lagging for pipe above ground