Description
30 metre x 40 metre Indoor or Outdoor Riding Arena - watering in 6 sections
Supply one Lowara multistage single phase 3hp pump unit compete discharge fittings to consist of; non-return valve, pressure relief valve with piped return to tank, manual isolator valve, pressure gauge and polyethylene pipe connection.
Supply polyethylene (PE) pipe which is to be installed from the pump unit to the arena and running behind the kickboards or fencing, forming a complete ring main.
Tee off the PE pipe with six solenoid valves and pipe to Hunter pop-up sprinklers, which are to be placed behind the kick boards or fencing, and will pop-up above the boards when operating and retract back down when watering is finished.
The arena will water in six sections.
Supply one electrical panel complete with breaker board, isolator, low water cut off controls, and one Hunter XC 6 station automatic controller.
Each watering package contains;
- Pump and controls
- Pipework and fittings
- Solenoid valve take offs including sprinklers
- Drain point take offs to drain down during cold spells
NOTE: Pictures may include optinal extras
Tank Option - Vertical Non-Potable Water Storage Tanks
These water tanks are made from a Medium Density Polyethylene (MDPE). Non Potable.
Tanks come with positive tie down points for easy handling and positioning.
- 1250 L – 30000 L Capacities
- UV stabilized to withstand the elements
- 450mm manhole access lid
- Positive tie down points
- Ribbed sides for extra strength
- Potable water tanks available
- Standard colour - Black
- Outlet bulkhead fitting
Tank Capacity | Dimensions Diameter x height |
|
Litres | Gallons | |
700 | 155 | 700mm Dia x 2150mm H |
2500 | 550 | 1400 dia x 1800 H |
4000 | 881 | 1900 dia x 1875 H |
5000 | 1101 | 1900 dia x 2185 H |
10000 | 2202 | 2400 dia x 2500 H |
Mains water fill float valve and pipe kit consists of;
- 25 metres of 25mm Blue mains water pipe
- 1 x compression stop cock
- 1 x 25mm x drain point x 25mm compression tee
- 4 x 25mm compression elbow
- 3 x 25mm x ¾" compression adaptor
- 1 x ¾" Double check valve
- 1 x ¾" Polypropylene socket
- 1 x ¾" Polypropylene M/F elbow 90
- 1 x ¾" Ball valve assembly
- 1 x ¾" Ball valve float
- 2 metres of 25mm lagging for pipe above ground