Toro Flex800 DT35 Series Pop-up Sprinkler

Toro DT35 Series 1” gear-drive rotor

Electric Valve in Head Sprinkler

Features and Benefits

All models:

Dual Trajectory Adjustment of the main nozzle—25° or 15°

A Toro patented exclusive, the selectable trajectory feature allows you to adjust the main nozzle angle to 25° or 15° quickly and easily with no additional parts required. Simply rotate the nozzle housing to select the angle you desire. The standard 25° angle provides the greatest distance of throw while the lower 15° angle helps fight the wind and throws below low hanging obstructions like tree branches.

Durability, Reliability and Serviceability

• Indestructible stainless steel valve seat eliminates body damage from rocks and debris in the system.
• Slow closing piston valve. For over 40 years Toro’s slow closing piston valve has eliminated pressure surges that can cause damage to the piping.
• Selectable pilot valve allows the user to identify, select and lock the pressure setting they desire.
• Removable rock screen from the top of the sprinkler allows you to flush the piping system quickly and thoroughly without worry of debris contamination.
• With fewer and more economical service parts, the DT Series will provide years of trouble free performance and a lower long term cost of ownership.

DT35/DT55 models:

A Large Nozzle Selection provides precise application

• From the main-less configuration for short radius applications to 100’ radius requirements, we’ve got you covered with the largest nozzle selection in the industry.
• A wide assortment of back nozzles water directly behind the sprinklers for those areas other sprinklers neglect.
• All nozzles are colour coded for easy flow and radius identification and thread directly in from the front so no additional disassembly is required
• An optional radius reduction screw allows for fine tuning the radius to exactly the distance you need.

Arc Adjustment—40°–330° and true full-circle in one

A full- and part-circle drive in one allows you to fine tune the watering area from 40° 330° and a true 360° unidirectional full circle. Use this drive everywhere on the course for maximum flexibility.

DT35 Features

• Nozzle variations: seven (31, 32, 33, 34, 35, 36 and 37)
• Three in-line nozzles, rotating stream pattern
• Optional back nozzle
• Stator variations: 2
• Apex at 65 psi, 25°:
• 31 nozzle: 11' @ 33'
• 32 nozzle: 12' @ 34'
• 33 nozzle: 13' @ 35'
• 34 nozzle: 14' @ 39'
• 35 nozzle: 15' @ 43'
• 36 nozzle: 17' @ 45'
• 37 nozzle: 18' @ 46'